SALVAGE DESCRIPTION

LAD (Aviation) Inc. t/a Charles Taylor Adjusting invites you to bid, within the published Terms & Conditions of sale, on the following salvage:

Bid # 190424-3-3107663B - Closes April 24, 2019 at 3:00pm CDT

Offered WITH Airframe Data Plate.

 

Registration: N365KA

Airframe: 2009 Cirrus     Model: SR22     S/N: 3381     Total Airframe Time: 1,141.0 Hours at Annual on 8/3/17 (See Logbook Entries) - Current Flight Meter Reading is 1,294.5 Hours (See Photos)  

Engine Manufacturer: Continental     Model: IO-550-N57B     S/N: 1000575     TT: 1,141.0 Hours at Annual on 8/3/17 (See Logbook Entries) - Current Flight Meter Reading is 1,294.5 Hours (See Photos)

LOGBOOK ENTRIES

AVIONICS PHOTOS

 

Avionics (See Photos)         

Type Make Model
SEE AVIONICS PHOTOS    

Date of Loss: May 13, 2018

Brief Facts: After an overrun of the runway the aircraft went down an embankment and came to rest in a river.  It appears only the nose and forward fuselage were submerged. - See photos  

General Description of Damage (May not be limited to the following obvious damage): The lower cowling was substantially damaged and the nose gear wheel and tire are no longer attached to the aircraft. The propeller impacted the water but the extent of propeller (or resultant propeller "strike") damage is not known. - You are encouraged to inspect the wreckage before bidding.

 

Location of Salvage for Inspection: at AMF Aviation in Springfield Robertson County Airport (M91), Springfield, TN. Contact Chris Ferraraccio at 931-980-1215 to schedule an appointment to view the aircraft.

CONTACT: Chris Klein  (972)447-2075; (972)447-9050 

EMAIL: Salvage Department

Note: The name and address of the salvage purchaser will be entered on the aircraft Bill of Sale.

Click on the image to see the Photo Gallery


 

Proceed to the Bid Form

 


Home    Available Salvage    Previously Awarded Salvage    Top of Page

Copyright 2008 LAD (Aviation) Inc. t/a Charles Taylor Adjusting
All Rights Reserved
Home    Disclosure & P
rivacy    Terms & Conditions    Contact Us