SALVAGE DESCRIPTION

LAD (Aviation) Inc. t/a Charles Taylor Aviation invites you to bid, within the published Terms & Conditions of sale, on the following salvage:

Bid # 170914-1-27747D Closes September 14, 2017 at 5PM CDT

T

Offered WITH Airframe Data Plate.

 

Registration: N106LN

Airframe: 1999 Eurocopter     Model: AS350 B3     S/N: 3251     Total Airframe Time: 7,681 + 58 (Per 6/7/13 Logbook Entry)

 

Engine:

Manufacturer: Arriel     Model: 2B Engine     S/N: 22036     TT: 5,772.21 Hours (at Overhaul on  04/22/11 - Overhaul at TMUSA)

 

Click Here for Original Logbook Entries

 

Click Here for Engine Overhaul Entries

 

Click Here for Engine Installation Entries

 

Click Here for Current Maintenace Records

 

Click Here for Avionics and Flight Deck Photos

 

Avionics or Equipment           

Type Make Model
SEE AVIONICS and FLIGHT DECK PHOTOS    

Date of Loss: June 8, 2013

THE AIRCRAFT HAS BEEN DISSASSEMBLED FOR TRANSPORTATION

Brief Facts: While simulating a hydraulic failure a run-on landing was attempted.  It is understood that aircraft control was lost when the airspeed decressed below the recommended approach speed.

General Description of Damage (May not be limited to the following obvious damage): The airframe sustained damage to the major structural elements and the main rotor blades impacted the ground.  See Photos.  You are encouraged to inspect the wreckage before bidding.

 

Location of Salvage for Inspection:  Air Salvage of Dallas in Lancaster, TX -- Contact Lucky Louque 972-227-1111 to schedule an appointment to view the salvage.

CONTACT: Chris Klein     (972) 447-2075 ; Fax (972) 447-9050

EMAIL: Salvage Department

Note: The name and address of the salvage purchaser will be entered on the aircraft Bill of Sale.

Click on the image to see the Photo Gallery


 

Proceed to the Bid Form

 


Home    Available Salvage    Previously Awarded Salvage    Top of Page

Copyright 2008 LAD (Aviation) Inc. t/a Charles Taylor Aviation
All Rights Reserved
Home    Disclosure & P
rivacy    Terms & Conditions    Contact Us